The purpose of extenders is to stretch the penis as comfortably as possible. The mechanism only works when the head is securely fastened. The duration of wearing the device depends on how secure and comfortable the mount is and, accordingly, the speed of progress. Vacuum extensions are considered the best option, as well as their improved version - vacuum adhesive extensions. These devices came onto the market about 10 years ago and since then have clearly replaced the mechanical ones.
Design features and principle of operation
With a vacuum extender, the glans is not fixed with a loop or a band, but sucked into a special bowl (chamber, vacuum nozzle) by vacuum. The device works on the principle of a vacuum pump, but in this case it affects only the head and the area adjacent to it. The air from the chamber is pumped out through a pump or pear, as in the pump.
The main advantages of models with vacuum fixation:
- Don't slip;
- Effectively correct male organ curvature;
- Do not pinch the head and foreskin;
- Suitable for micropenis;
- Comfortable to wear.
The main disadvantage of vacuum mounted extenders is the appearance of blisters on the head. This does not happen when mechanically. The damage is caused by delamination of tissues under the influence of vacuum. It is impossible to continue classes until the blisters heal, and since they appear regularly, the effectiveness of wearing the device decreases significantly.
Many manufacturers complete their products with protective caps to protect the head. Some models come with patch rollers that are meant to be sealed before inserting into the cap. The process of sticking and then removing causes discomfort and pain.
Some men complain about the inconvenience of putting on such extenders: the protection is not attached to the relaxed head, it is necessary to bring the penis to a state of at least partial erection. While wearing the extender, the head sinks, creating a gap between it and the walls of the cap - the skin is again exposed to the traumatic effects of the vacuum.
Scheme for applying a vacuum extender:
- Close the head, put a protective cap on it.
- Partially unroll the silicone sleeve attached to the top of the camera onto the body.
- Place the penis in the chamber, unroll the silicone sleeve along the shaft to the end.
- Suck out excess air with a blower or pump.
- Attach the penis to the extension rods, adjust the length.
Part of the penis is tightly squeezed with silicone, causing discomfort and disrupting blood flow. The closed area of the trunk is almost not extended. When the penis is about 12 cm long, most of it is under the silicone clamp.
In advanced models with vacuum adhesive attachment, only the head is sucked into the chamber and the sleeve is replaced with soft membranes. The penis and the membrane are pre-lubricated with a special lubricant, then the head is brought to the chamber opening and sucked in with several movements of the rubber ball. Then it is disconnected, the device is securely attached to the head. To remove it, simply twist the valve at the top of the chamber. The lubricant adheres the head to the diaphragm, preventing gaps from forming, thereby preventing bubbles from occurring.
how to use
Before putting on the vacuum extender for the first time, the initial length is determined - the size of the erect penis. In the future, the compressive force is regulated by the springs on the rods (on spring-loaded models): when the scale is fully visible (the notches are not closed), there is no tension. If tension is not felt with the rods fully unscrewed, add the extra length with the rods included in the kit. The tensile force of the stretcher (belt system) can be determined using a household spring scale.
It is impossible to immediately set a high level of tension: it is possible to condense the albuginea covering the cavernous bodies, worsen the erection, edema of the head, lack of growth and even a decrease in the length of the penis. A light adaptive load is given within a month. The extender is not worn for more than 1-2 hours with a tension of 200-400g, maximum 500g. When the tissues of the penis get used to the stretching, you should switch to a more serious mode: 6-8 hours a day (not necessarily continuously) with a load of 1. 1 kg. The extender can only be worn to its maximum length (power train) from 4 weeks.
Performance Growth Program:
- Unscrew the extender to the length of the erect penis, tension 300-600g;
- When putting it on, the load can increase to up to 1kg;
- Wear 2 hours a day without a break or spend 2 sessions of 1. 5 hours. One day off per week is required.
It is important to measure the length of the penis (stretched, not erect) after each workout. The increase indicates the effectiveness of the selected program. When the penis decreases, a break of 2-3 days is required.
With the help of vacuum extenders it is possible for a year to increase the length of the penis by 3-4 cm and its girth by 1 cm. In young people, growth occurs faster than in mature men due to the high elasticity of tissues. The result also depends strongly on the density of the protein shell.
contraindications
Before buying a vacuum extender, you should consult a doctor - he will help you identify the presence of contraindications to wearing it. The most important include the following:
- Violation of blood coagulation, fragile vessels. Vacuum will provoke the appearance of hematomas.
- prostate adenoma, prostatitis.
- testicle rupture
- Sexual Infections.
It is dangerous to use vacuum extenders while under the influence of painkillers, drugs or alcohol. It is undesirable to put on the device at night - in a dream it is easy to miss the moment of the onset of tissue oxygen starvation due to excessive squeezing, and spontaneous nocturnal erections are also dangerous.
Overview of popular models
Most urologists-andrologists recommend their patients to use a vacuum system with vacuum adhesive fixation for penis enlargement. The soft membrane protects the head from damage by preventing direct exposure to vacuum. The vacuum gluing model is also considered to be convenient and efficient. The kit includes a camera, a bulb, rods, a set of membranes of different sizes, extension rods and gel. There are detailed instructions on how to properly put on and wear the device. The maximum extension length is 32 cm.
There is a kit to upgrade strap and loop extenders. However, the cost is so high that it is easier to buy a vacuum extender.
The Korean extender is positioned by the manufacturer as the most comfortable to wear with additional head enlargement function. Attachment using vacuum bonding. The kit contains 3 membranes, 8 screw-on extension pins.
Usage method:
- A diaphragm of appropriate diameter is stretched over the edges of the chamber and lubricated (along with the head of the penis) with a lubricant.
- The camera is placed on the poles;
- The shaft of the penis is inserted into the extender, the head is threaded into the chamber;
- The pear pumps air out.
The device from a Swiss company is a vacuum extender designed for continuous use. According to men, it is considered the most convenient. The kit includes 3 vacuum chambers with attached condoms, 4 cuffs, 2 protective caps, a pump. The model includes a belt attachment system (stretcher), which allows using the extender in public places.
Instructions for use:
- A protective cap is placed on the head.
- The penis is threaded between the extension rods, the rods being wrapped until the optimum level of tension is reached.
- The head is placed in an appropriately sized chamber (a template for sizing is attached), a condom is rolled onto part of the torso.
- A pump in the form of an accordion is attached to the chamber, with the help of which air is pumped out.
If necessary, the bars are removed, a member with a camera on his head is pulled to the belt with a belt.
Some make homemade extenders out of bike pump housings, plastic, silicone, and plumbing fittings. It is very difficult to make a truly working and safe device with your own hands. In terms of quality, such tinkering is usually inferior to cheap Chinese extenders.
reviews
Man, 44 years old: "I've been wearing the device with belt tensioner for six months. The increase in length was 2 cm - a significant result. I supplement traction with jelq and hanging weights, but rarely.
Male, 25: "I ordered a Chinese device and am considering returning it or exchanging it for a Korean one before it's too late. It is uncomfortable to wear, the penis is squeezed to the point of colic, there can be no question of effectiveness in such conditions.
Conclusion
Swiss, Korean and German-made vacuum extenders are officially recognized as effective means of penis enlargement. Equipped with detailed video instructions that exclude misuse. It is important to consider that the regularity of wearing an extender is as important a requirement for success as its quality.